Filter By:
- Bar Ends (2)
- Bottom Brackets (9)
- Brakes/Levers/Pads (40)
- Cables (2)
- Cassettes/Freewheels (20)
- Chainrings (19)
- Chains (18)
- Cranksets (12)
- Show More Categories
- Derailleurs (13)
- Forks (3)
- Groups (4)
- Handlebar Grips/Tape (23)
- Handlebars (3)
- Headsets (2)
- Pedals (21)
- Saddles (21)
- Seatposts (7)
- Shift/Brake Combinations (4)
- Shifters (18)
- Stems (13)
- Other (51)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Parts

$4.99
- Missing links to make chain installation, maintenance and reparation easier
- Reusable up to 3 times
- Compatible with 6, 7 and 8 speed IG drivetrains
- Pin width: 7.1mm
- Card of 2

$4.99 - $18.00
Power Links provide tool free chain assembly.
- 8-speed width: 7.1mm
- 9-speed width: 6.8mm
- Chain Compatibility: SRAM
- Reusable: Yes

$4.99 - $18.00
Power links provide tool free chain assembly.
- Chain Compatibility: SRAM
- Reusable: No

$5.49 - $11.99
Jagwire's Sport Slick Stainless Shift Cable is a high-quality shift cable made of stainless steel for excellent shifting performance, corrosion resistance and durability. It also comes in lengths to fit single and tandem bicycles.

$6.99 - $9.99
Compatible with cantilever brakes, Jagwire's Mountain Sport Brake Pads boast Jagwire's tried-and-true all-weather compound for excellent speed control, stopping power and durability.

$7.99
Dimension Nylon Basic Toe Straps
-Durable metal buckle
-Multi-purpose strap can also be used as a lash strap for bike touring or rear rack (caution must be used to keep the strap tail out of the wheel)
- 450mm

$7.99 - $9.99
Compatible with linear-pull and cantilever brakes, Jagwire's Mountain Sport Brake Pads boast Jagwire's tried-and-true all-weather compound for excellent speed control, stopping power and durability. They come in standard Black plus Yellow, Red, Pink, Blue and Gray for adding a little style to your ride.

$8.00
Replacement Remote-end Hose Barb for RockShox Reverb dropper seatposts.
- Fits all generations of Reverb

$8.50
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity
- No retainer means these bearings have 40 percent more capacity

$8.50 - $11.99
Grips are a key point of contact between you and your bike. Comfortable grips are a must-have.
Product details
- Designed for use on kids' bikes without shifters
- Set of two grips
Specifications
- Length: 107mm
- Diameter: 22.2mm
- End Type: Closed
- Lock-on: No
- Material: Kraton Rubber

$9.00 - $21.99
SRAM's MRX Comp Twist Shifters are simple to use and offer solid shifting and reliable construction. They shift a 2:1 Shimano rear derailleur.

$9.99 - $12.99
The Charger Evo is the most complex grip we’ve ever created. Dual-patterned textures on each grip allow riders to absorb shock and feel handlebar support with every move. The single-compound grip makes application and removal easy in a grip that athletes can count on. Single Compound Grips include push in plugs.
- Length: 140mm
- Weight (with plugs): 108 grams
- Diameter: Medium (31mm)

$9.99 - $10.50
The Problem Solvers Seatpost Shim is what you need when your seatpost is a little too small-diameter to fit tightly into your frame. It's made of light, durable aluminum and has a lip on the top so it won't slide down inside the frame during installation.

$9.99 - $11.99
Switching frames doesn’t mean you have to switch posts! Use your old posts without worry with Problem Solver's wide variety of seatpost shims.
-100mm long
-3mm lip
-Alloy
Problem Solvers Seatpost Shims are not intended for use with carbon seatposts

$10.95 - $16.99
The classic Longneck ribbed grip pattern with an open end to accomodate end plugs now comes without a flange!
- Classic mushroom style collapsible rib pattern
- Constructed of our proprietary Soft Grip compound for added comfort
- Increasingly popular with top athletes around the world
- Open ends with black and white Two Color Push In Plugs end plugs included

$10.95 - $14.99
The classic flangeless Longneck ribbed grip pattern with an open end to accommodate end plugs now gets an extra 25mm of length!
PRODUCT FEATURES:
- Classic mushroom style collapsible rib pattern
- Constructed of our proprietary grip SOFT compound for added comfort!
- Increasingly popular with top athletes around the world
- Open ends with Push In Plugs end plugs included
- Sold In Pairs
- 160mm

$10.99 - $12.00
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters.
- Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series
- Integral mold seals keep out the elements
- Durable steel construction

$11.99 - $17.99
With this clever little clamp you can quickly retro-fit any bike for a rear rack. Threaded eyelets are built into the clamp for easy, secure mounting on non-eyeleted or smaller frames.
- Features threaded eyelets for rear rack mounting solutions on unique bike frames
- Quick release (QR) versions include rubber lever grip

$11.99 - $24.00
40-Series replacement cartridge bearings feature durable black oxide construction.
- Compatible with 110-, 40-, and 10-Series headsets

$11.99 - $16.00
The KMC S1 is a single-speed chain suitable for use with internally geared hubs, or any single speed drivetrain.
- High pin power with reinforced durability
- Offers a quieter riding experience
- Anti-drop design
- Inner plate chamfering helps to provide fast and smooth shifting
- Internal gear hub system compatible
- Links (links): 112
- Color: Silver
- Width: 9.3mm
- Drivetrain Speeds: Single Speed 1/2 x 1/8-inch
- Half Link Chain: No

$11.99
Adapters to convert your flat mount frame or fork to post mount.
- FF-1 front 140mm rotor
- FF-2 front 160mm rotor
- FR-1 rear 140mm rotor
- FR-2 rear 160mm rotor

$12.99 - $23.99
M21 rear derailleurs are designed to work with 6- and 7-speed Shimano road and mountain shifters. Enjoy the wide variety of bikes you can get going again with M21 rear derailleurs.
- Robust composite and steel construction
- Compatible with Shimano 6- and 7-speed mountain and road systems

$13.99 - $16.99
Keep your seatpost right where you left it. Upgrade to a quick release seatpost clamp for easy seat height adjustments.
- Follow laser-etched torque listing on collar

$13.99
Salsa's Split Pivot Dropout Tool might get you out of a jam, adding no weight to your equipment. This handy tool works as a headset top cap until you need it, and when combined with a 6mm hex wrench, turns into a socket for removing the Pivot Bolt to change your derailleur hanger
- Lightweight aluminum bolt
- For all Salsa Split Pivot suspension models
- Integrated 22mm socket design interfaces axle nut to field-change the derailleur hanger
- Operated via 6mm hex key found on most mini tools
- Takes place of standard top cap
- Eliminates the need to carry a 22mm wrench or socket in your pack
- Lightweight, black anodized aluminum bolt included
- 13g

$14.99 - $15.99
Adapters to convert your rear flat mount frame to post mount caliper
- FR1-R140 = rear 140mm rotor
- FR2-R160 = rear 160mm rotor
- Each includes two 32mm bolts

$15.75 - $32.99
- T100 Sintered Metallic: long-life, all-condition compound
- T106 Semi Metallic: no-bed, shorter-life, quieter compound
- Set includes one pair of pads with retention clip

$16.00
SRAM's PC 830 Chain offers accurate shifting, excellent durability, and superior power transfer for 8-speed drivetrains.

$16.00
The Universal Derailleur Hanger consolidates thousands of hanger options across the industry. It protects your derailleur against chain jams by pivoting back and out of the way, and slips slightly when encountering impacts. It improves shifting performance, guarantees better alignment, and works with all drivetrains. Plus, if you ever need replacement, it will be available everywhere. The UDH: one hard-working hanger.
- The Universal Derailleur Hanger—or UDH—consolidates thousands of mountain bike derailleur standards.
- It offers unparalleled derailleur protection and perfect alignment, guaranteed.
- The UDH is designed to rotate rearward in the event of impact and features the ability to "re-rail" the chain back onto the small cog.
- The UDH works with all commercially available MTB and E-MTB drivetrains from Shimano to Box to Sunrace.

$16.00
Surly Stainless Steel Track Lockring.
- Fits all but Campagnolo, Miche or Phil Wood
- 5mm thick with 0.65mm lip for maximum thread and lockring wrench contact

$16.50
iSSi's SPD cleats are perfect for all your SPD-compatible pedals. If your entry and exit isn't what it used to be, a cleat replacement is just what the bike doctor ordered.
- 4 degrees of float both inward and outward

$17.99
A set of durable, SPD-compatible replacement cleats that come with all mounting hardware.
Get that fresh cleat feel
These solidly-built cleats work with any SPD-compatible pedals whether you're looking for replacements, need a new set for a new pair of kicks, or just like to keep an extra pair in your toolkit.
Product details
- Compatible with all 2-bolt SPD-style pedals
- Directly compatible with Bontrager Comp MTB and Commuter pedals
- Includes mounting hardware
- Float: 4-deg

$17.99 - $24.99
Shimano Tourney CS-HG200-7 7-speed cassette
Combinations:
- 12 – 28T: 12-14-16-18-21-24-28T (bm)
- 12 – 32T: 12-14-16-18-21-26-32T (bp)

$18.00
SRAM's PC-850 Chain makes a trusty partner over hill and dale. It's easy to install, too, thanks to the no-tools-needed PowerLink. Quiet, smooth, reliable and very affordable, the PC-850 is a fine value.

$18.00
The PC-951 is SRAM's most economical PowerChain and maintains their high standards of quality. It boasts tough chrome-hardened pins for durability and accurate shifting. And, with its great PowerLink, you don’t even need tools to install it.

$19.00 - $30.00
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

$19.95 - $21.95
Slightly thicker than the Razer Grips, slightly thinner than the Fat Paw Grips, these 6.5mm thick grips are great for longer rides, as they reduce hand fatigue and finger numbness.
- 100% proprietary dual-density silicone compound provides excellent vibration damping and conforms to your hand for improved comfort while maintaining durability
- Tacky texture provides excellent grip with or without gloves in all weather conditions
- 6.5mm thick

$19.99
Cold-forged for strength, bead-blasted for grip
These bar ends feature a no-slip gripping surface and offer more comfortable hand position options.
Bar ends offer increased comfort, greater variability in hand positioning, and improved leverage for climbing. Bontrager Forged Bar Ends are cold-forged for strength and durability and bead-blasted for better grip and control on the trail.
Product details
- Cold-forged, welded alloy construction
- Bead blasted finish provides grip and adds strength
- Offset tube design for more usable handlebar area

$19.99
A lock-on grip with a unique finned texture for added comfort and control.
Get a grip on sustainability
The XR Trail Comp grip features a unique finned texture that conforms to your hand to keep you comfortable all day while you ride. Plus, a lightweight nylon CoreLock clamp holds the grip securely in place for confidence on even the most technical trails. You and your hands will both feel good knowing that the grip's core is made from recycled ocean-bound plastics.
Product details
- Finned texture pattern conforms to your hand for supportive grip
- Rubber compound and tread design are optimized for control and comfort
- Grip core made with recycled ocean-bound plastic
- Single-clamp design maximizes grip surface for secure, predictable performance
- Nylon CoreLock clamp offers dual clamp strength
- 3mm M4 bolt increases hold and resists stripping
- 31mm diameter

$19.99
Recommended for grip shift and riders looking for the best shock absorbing grip in the industry. 60 grams, standard grip length - 5 1/8", installed DIA. 32mm, weight plus or minus 5%, 1 set of bar plugs included.
- 60 Grams
- Standard Grip Length – 5 1/8"
- 32mm
- Weight plus or minus 5%
- Made for 22mm bars (can fit applications down to 19mm)
- Bar Plugs included
- *Install Bar Plugs first for the protection of grips and ease of installation

$19.99
M21 rear derailleurs are designed to work with 6- and 7-speed Shimano road and mountain shifters. Enjoy the wide variety of bikes you can get going again with M21 rear derailleurs.
- Robust composite and steel construction
- Compatible with Shimano 6- and 7-speed mountain and road systems
- Long cage for double or triple cranksets and 32T max cassette cog
- Includes frame hanger attachment for use with older frame designs

$19.99
Upgrade your suspension fork with ultra-low friction wiper seals providing unmatched suspension feel, all while keeping the dirt where it belongs- because no one wants dirt in there.

$19.99 - $27.99
For reliable mountain bike shifting, Shimano's SL-M315 RAPIDFIRE shift lever is suited to quick shifting, giving riders the ability to downshift three gears in one stroke.
- Slim main lever body
- OPTISLICK for smooth shifting performance
- Gear display positioned below the handlebar
- Numbered gear display indicates gear position at a glance
- Light shifting operation, wider compatibility, and suitable for internal cable routing
- Streamlined cockpit experience

$19.99
FD-A073 Tourney Front Derailleur for 2x7 or 3x7 drivetrains.
- SG-X chainring compatible
- Quick assembly
- Interchangeable with SHIMANO road 7-speed system
- Easy adjusting
- Light operation and smooth shifting

$19.99
Get back on the trail with a quality replacement hanger.
- Trek/Fisher full suspension rocker pivot suspension hardware
- For specific compatibility concerns, please contact our Customer Service team
Specifications:
- Size: Rear drive side, 148x12mm Thru Axle
- Mounting location: Rear drive side
- Attachment: Thru axle nut

$19.99
Get back on the trail with a quality replacement hanger.
- Attachment hardware is sold separately
- For specific compatibility concerns, please contact our Customer Service team
Specifications:
- Size: Rear drive side, 135mm Q/R
- Mounting location: Rear drive side
- Attachment: 1-bolt

$19.99
Get back on the road with a quality replacement hanger.
- Attachment hardware is sold separately
- For specific compatibility concerns, please contact our Customer Service team
Specifications:
- Size: Rear drive side, 135mm Q/R
- Mounting location: Rear drive side
- Attachment: 2-bolt

$19.99
Get back on the trail with a quality replacement hanger.
- Attachment hardware is sold separately
- For specific compatibility concerns, please contact our Customer Service team
Specifications:
- Size: Rear drive side, 135mm Q/R
- Mounting location: Rear drive side
- Attachment: 1-bolt

$19.99
Get back on the trail with a quality replacement hanger.
- 30mm washer provides full coverage over ABP bearing seals
- Included attachment hardware is reverse threaded
- For specific compatibility concerns, please contact our Customer Service team
- Hanger can be used on standard SRAM UDH set ups with 25mm washer
Specifications:
- Size: Rear drive side, Thru Axle
- Mounting location: Rear drive side
- Attachment: Thru axle nut

$20.00
45NRTH's Replacement Pedal Pins are a great way to customize the style and grip of your 45NRTH pedals (sold separately). These tough, aluminum pins deliver fantastic bite into traditional winter boots, and come in a variety of colors to coordinate with your rig. Plus, the included wrench keeps the job quick.
- Includes: 32 pins and wrench

$20.00 - $27.99
SRAM's MRX Comp Twist Shifters are simple to use and offer solid shifting and reliable construction. Shifting one gear or the whole range is simple with just a twist of the wrist. They shift a 2:1 Shimano rear derailleur and a SRAM or Shimano derailleur up front.

$20.00
Original equipment rear derailleur pulleys for SRAM rear derailleurs.
- NX/SX Eagle Rear Derailleur Pulley Kit

$20.00
Eagle Technology creates the smoothest, quietest, longest lasting and most efficient drivetrains SRAM has ever made. The radical new look and feel of the X-SYNC 2 Eagle chainring is a direct result of SRAM drivetrain engineers studying the performance and wear characteristics of thousands of X-SYNC chainrings. The longer, positive-rake tooth shape has been designed to work perfectly with Eagle chains to increase chain retention and overall pedaling efficiency, while decreasing friction, noise, and wear. The complete Eagle system—crankset, chainring, chain, shifter, derailleur and cassette—is designed, tested, and proven to deliver the ultimate mountain bike drivetrain. Put simply, Eagle is capable of revolutionizing the ride for all riders on every kind of terrain.
- Designed to be used with Eagle chain
- Material: Steel

$20.00
The SRAM X-Sync Steel 1x chainrings are the perfect replacement ring for the cost conscious with added durability of steel. The same SRAM X-Sync technology at a price well below competitors’ imitation “narrow wide” rings. Best performing chainrings at the best price.
- Compatibility: Compatible with all SRAM 1x cranks, DM 28-tooth ring is not compatible with 30mm cranks that require a 0mm offset ring

$20.00
Replacement derailleur hangers for Salsa frames.
Mounting screws included.
Hanger 257 Fits: Salsa Ala Carte Ti 2011, Salsa El Mariachi Ti 2010-2012, Salsa Fargo 2011-2013, Salsa Fargo Ti 2011-2013, Salsa Spearfish 2011-2013 with QR Rear Triangles, Salsa Vaya 2011+, Salsa Vaya Ti 2011-2012, Salsa La Cruz Ti 2011, Salsa Beargrease 2013, Salsa Warbird 2013-2015, Salsa Warbird Ti 2013-2015, Salsa Colossal 2013+, Salsa Colossal Ti 2013-2014, Salsa Mamasita 2012-2013, Foundry Chilkoot 2016
Hanger for 2014+ Split Pivot Frames Fits: all Split Pivot Horsethief, Pony Rustler, Spearfish Bucksaw and Deadwood Suspension
Hanger for 2015 Beargrease 2 and Cogburn CB4 Fits: Cogburn CB4 and Salsa Beargrease 2 2015
Page 1 of 6
Next page