Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Parts

$64.99
The Spyre is a mechanical disc brake that offers superior performance with incredibly easy setup. This is a dual-piston-actuated mechanical disc brake caliper that provides precise clamping force. This translates into even pad and rotor wear, because the rotor does not need to flex to one side during braking. We added a simple cable barrel adjuster to make fine-tuning easy. All of this in an incredibly thin 40mm, 146g package that works with any drop bar levers on the market. Rotors and adapters are sold separately. For tandem bikes, we recommend the Spyre caliper paired with our 2.3mm thick rotors. This will give optimum stopping performance for you and your partner. SPECIFICATIONS - Weight: 154g per caliper - Dual-sided actuation - Works with ALL cable-actuated road levers. Compressionless (linear strand) housing is highly recommended - Comes with TRP ultra-grippy semi-metallic pads - Calipers are compatible with Shimano M525/M515 pads - 160mm rotors recommended on front wheel - Rotors, adapters, and flat mount mounting bolts sold separately - All flat mount calipers being mounted to the fork require the FF-5 Front Flat Mount 140/160mm adapter - Sold as a caliper only
$34.99
Precision CNC machined of light and durable 7000-series aluminum with a fine anodized finish, and 100% made in the USA, Thomson's Seatpost Collar is a beautiful upgrade for your bicycle. It features their bolt, washer and barrel nut combination that allows float on both sides of the collar slot for consistent clamping force. Plus the bolt-hole angle, the collar's 12.7mm inside height and the offset slot, ensure optimum seatpost clamping force at only 25 inch pounds of torque to protect your precious frame and seatpost.
Get back on the trail with a quality replacement hanger. - Attachment hardware is sold separately - For specific compatibility concerns, please contact our Customer Service team Specifications: - Size: Rear drive side, 135mm Q/R - Mounting location: Rear drive side - Attachment: 1-bolt
$5.00
Original equipment for your mountain bike. - Used to attach fender and rack to Powerfly FS 2021 - Rack and fenders sold separately - Sold as single bolt with washer - 2 needed on Powerfly FS 2021 non-equipped for short fender - 6 needed on Powerfly FS 2021 equipped for full fender and rack
$5.99
Genuine replacement parts Genuine replacement parts Original Equipment specifications. Compatible with Bosch Powertube RIB batteries. - Hardware should be ordered separately
$14.99
Trek proprietary suspension hardware. - Refer to Service Manual for assembly instructions and service - Sold individually
$19.99
Get back on the trail with a quality replacement hanger. - Trek/Fisher full suspension rocker pivot suspension hardware - For specific compatibility concerns, please contact our Customer Service team Specifications: - Size: Rear drive side, 148x12mm Thru Axle - Mounting location: Rear drive side - Attachment: Thru axle nut
$19.99
Get back on the trail with a quality replacement hanger. - Attachment hardware is sold separately - For specific compatibility concerns, please contact our Customer Service team Specifications: - Size: Rear drive side, 135mm Q/R - Mounting location: Rear drive side - Attachment: 1-bolt
$19.99
Get back on the trail with a quality replacement hanger. - 30mm washer provides full coverage over ABP bearing seals - Included attachment hardware is reverse threaded - For specific compatibility concerns, please contact our Customer Service team - Hanger can be used on standard SRAM UDH set ups with 25mm washer Specifications: - Size: Rear drive side, Thru Axle - Mounting location: Rear drive side - Attachment: Thru axle nut
$22.00
Get back on the road with a quality replacement hanger. - Attachment hardware is sold separately - For specific compatibility concerns, please contact our Customer Service team Specifications: - Size: Rear drive side, 135mm Q/R - Mounting location: Rear drive side - Attachment: 2-bolt
$24.99
Get back on the trail with a quality replacement hanger. - Attachment hardware is sold separately - For use with 135x5mm hubs Specifications: - Size: Rear drive side, 135mm Q/R - Mounting location: Rear drive side - Attachment: Thru axle nut
$24.99
Get back on the trail with a quality replacement hanger. - Attachment hardware is sold separately - For use with 142x12mm, 148x12mm, 157x12mm, and 197x12mm hubs Specifications: - Size: Rear drive side, Thru Axle - Mounting location: Rear drive side - Attachment: Thru axle nut
$24.99
Genuine replacement parts Use a smaller battery in your 625Wh RIB battery slot. Fill the gap between your 625Wh battery slot and your 500Wh battery. - Not compatible with Bosch Smart System batteries - Only for use in 625Wh slots with 500Wh batteries - Hardware is included - Refer to Service Manual for assembly instructions and service
$29.99
Genuine replacement parts Get back on the trail with a quality replacement hanger. Don't be left hanging. - Attachment hardware is sold separately - Compatible with Superfly SS 2015-2016 (142x12mm OLD) - Compatible with Stache 29+ 2016-2022 (148x12mm OLD) - Compatible with 1120 2018-2022 (148x12mm OLD) - Compatible with Farley 2016-2022 (197x12mm OLD)
$55.99
Platform pedals with a durable nylon design and replaceable pins for consistent grip. - Durable nylon body with a proven shape for comfort and confidence - Virtual concave design with pin placement secures your shoe for pedaling and descending - Durable axle spins on sealed cartridge bearings - Replaceable steel traction pins - Install with 8mm hex wrench
$63.99
Trek proprietary headset components are compatible with Trek Knock Block models. Service and replacement parts specifically for Trek Knock Block Technology. PRODUCT DETAILS - Compatible with all Trek Knock Block models - Includes crown race, bearings, top cover, frame chip & fastener - Must be paired with Knock Block stem and Knock Block spacers - Knock Block headset spacers not included
$74.99
Dual-sided, SPD-compatible clipless MTB pedals have trail-worthy durability with the efficiency of clipless CLIP INTO CONFIDENCE ON THE TRAIL The Line Comp Clipless Pedals have a durable diecast aluminum cage to protect from rock strikes and give a confidence-inspiring platform for easily clipping in, all while quickly clearing mud and debris. These pedals are best for you if you want serious clipless trail pedals that don't break the bank. PRODUCT DETAILS - Dual-sided SPD-compatible trail MTB clipless pedals - Fully adjustable clip in & clip out tension - Durable die cast aluminum body & cage to protect against rock strikes - The cage on trail pedals provides a platform for easily clipping in - Dual sealed ball bearings with chromoly spindles for smooth spinning durability - Install direction & torque spec listed on spindle - Includes cleats and mounting hardware
$99.99
Our best flat pedal features replaceable traction pins and fully serviceable internals for lasting performance. - Dial in your preferred traction with tunable pin placement and contact height - Concave pedal body locks in foot placement for pedaling and descending - Durable axle spins on sealed cartridge bearings - Replaceable barbed traction pins - Pedal body is made from 6061-T6 aluminum - Install with 8mm hex wrench
$32.00 - $34.99
The Descendant grip is for the performance-driven hard charger who needs maximum grip and confidence in their cockpit. Featuring a full-width contact area that extends from the inner clamp right to the end of the bar. The ridged pattern allows for a soft-to-touch feel and makes for superior grip and control. Available in solid colors, marble and gum options, these grips give you the option to match grip performance with your personal style. - Single-ring clamp for max width and comfort - Available in Black, Gray, Gum Rubber, Red, Gray/Black Marble and Red/Black Marble - Soft and durable ridged rubber grip pattern - Length: 133mm - Clamp: Single
$194.00
On the big days, it's the small comforts that make the ride better, longer. That's why we re-engineered our carbon riser bars to improve feel, flex and rider positioning and reduce trail buzz. These bars are stiff, precise and forgiving. With a re-tuned carbon laminate, your shoulders, arms and hands keep fresh all day. - Available in 760mm carbon with 20mm rise - 35mm clamp - Super-wide to start and trimmable by 40mm (20mm each side) - Specialty tuned carbon laminate to absorb noise while maintaining stiffness SPECIFICATIONS - Type: Riser - Clamp Diameter: 35.0mm - Width: 760mm - Rise: 20mm - Backsweep (degrees): 7
$21.99
VP's Grind Pedals meet the needs of hard-core riders who want a slick and durable set of pedals, and they also work great for anyone who likes stable and comfortable platforms. The Grinds have versatile good looks and feature a thin profile, durable 1-piece nylon bodies with grip pins, boron-steel axles and oversize inboard bearings. - 380 grams - 9/16" axles
$40.00 - $59.99
Velo Orange Happy Stem. A polished threadless stem with a 45 degree angle to keep your back and wallet happy. - At least 37mm of steerer is required - Does not require a stem cap. Longer compression bolt included - Not compatible with carbon steerer tubes
$39.95
The Koda was refined through two years of feedback from female testers and has evolved into a saddle that even the boys at the office are fighting over. This saddle boasts all-day comfort and a shape that everyone can enjoy. - All-day comfort with a generously open channel dividing supportive outer zones to alleviate pressure on your sensitive bits - Short nose provides seamless on-off transitions while a slightly swooped shape provides an adequate tail to brace against - Steel rails
$39.95 - $44.99
The Rocket is an incredibly versatile saddle. From a two minute hair-raising downhill to a 2700-mile individual time trial, this saddle is the top choice for those pushing the sport. - Narrow nose and midsection means no chafing during long pedaling sessions - Thick padding and a swooped tail allow riders to lock in their ideal position for power and comfort - Steel rails
$39.95 - $47.95
The Volt is our most popular mountain saddle. Shaped for speed and comfort, time tested and proven, the Volt makes for an incredibly versatile saddle that has gained endless acclaim among riders. - Medium padding thickness and subtle curves make the Volt our most popular mountain saddle - An upward curved tail and gentle drop to the nose provide something to push against while pedaling - Steel rails
$44.99
WTB's best-selling saddle utilizes our shock-absorbing, dual compound Soft-Shell base to provide unparalleled comfort at an excellent value. Supportive padding and mid dimensions make for a near fool-proof favorite at a don't-think-about-it-twice price. - Steel rails
$79.95
The Rocket is an incredibly versatile saddle. From a two minute hair-raising downhill to a 2700-mile individual time trial, this saddle is the top choice for those pushing the sport. - Narrow nose and midsection means no chafing during long pedaling sessions - Thick padding and a swooped tail allow riders to lock in their ideal position for power and comfort - Cromoly rails
$79.95
WTB's best-selling saddle utilizes our shock-absorbing, dual compound Soft-Shell base to provide unparalleled comfort at an excellent value. Supportive padding and mid dimensions make for a near fool-proof favorite at a don't-think-about-it-twice price. - Cromoly rails
$22.00
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399) - CNC machined 6061 aluminum - Made in the USA
$40.00
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399) - CNC machined 6061 aluminum - Made in the USA