Filter By:
- Bar Ends (1)
- Bottom Brackets (13)
- Brakes/Levers/Pads (35)
- Cables (4)
- Cassettes/Freewheels (19)
- Chainrings (26)
- Chains (22)
- Cranksets (17)
- Show More Categories
- Derailleurs (14)
- Forks (3)
- Groups (2)
- Handlebar Grips/Tape (25)
- Handlebars (6)
- Headsets (3)
- Pedals (25)
- Saddles (14)
- Seatposts (10)
- Shift/Brake Combinations (5)
- Shifters (17)
- Stems (15)
- Other (74)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Parts

$16.50
iSSi's SPD cleats are perfect for all your SPD-compatible pedals. If your entry and exit isn't what it used to be, a cleat replacement is just what the bike doctor ordered.
- 4 degrees of float both inward and outward

$105.00
iSSi's Trail Pedals offer bold styling, reliable technology, and a wide platform for better contact while in and out of the pedal. The Trail platform disperses pressure on your foot and provides a little extra confidence when descending unclipped. Dual-sided entry makes these SPD-compatible pedals simple to get into, while easily adjustable entry/release tension is perfect for beginners and experts alike. Plus, four degrees of float helps your knees track naturally during every crank revolution.

$125.00
iSSi's Trail Pedals offer bold styling, reliable technology, and a wide platform for better contact while in and out of the pedal. The Trail platform disperses pressure on your foot and provides a little extra confidence when descending unclipped. Dual-sided entry makes these SPD-compatible pedals simple to get into, while easily adjustable entry/release tension is perfect for beginners and experts alike. With triple-sealed cartridge bearings and durable chromoly spindles, these pedals will spin smoothly for countless rides. Plus, four degrees of float helps your knees track naturally during every crank revolution.

$299.00
The e*Thirteen TRS Plus 12-Speed Upgrade Kit lets you upgrade your existing 11-speed SRAM drivetrain to a 12-speed drivetrain without needing new cranks, chainrings, shifters, or derailleurs. All parts and required tools are included including new internals for the SRAM shifter.
- Kit is also compatible with Shimano XTR, XT, and SLX 12-speed drivetrains when used with Shimano 12-speed derailleurs and shifters
- Smaller 9-46T cassette gives a better chainline, for longer-lasting drivetrains
- The assembly utilizes XD Driver mounting to enable a 9-46T 12-speed cassette, keeping the drivetrain simple, yet providing the gear range of a 2X system
- Cassette Body Type: SRAM XD 11/12 Speed
- Cassette Cogs: 9-10-12-14-16-18-21-24-28-33-39-46
- Drivetrain Speeds: 12
- Color: Black
- Weight: 336 g

$74.95
The e*thirteen e*spec Plus Crank Arm Set is designed to work with Bosch Gen 4 eBike motors. These alloy crank arms offer a slim Q-factor and smaller overall profile, while keeping e*thirteen's proven crank technology at the forefront.
- An 8mm self-extractor bolt is built into both arms for easy removal
- 6061 Aluminum
- Number of Chainrings: No Rings Included
- Chainline/Hub Compatibility: 141/148 Boost Hubs, 150/157 Hubs
- Crank Intended Use: Mountain
- Pedal Spindle: 9/16"
- Designed for ebike: Yes
- Drivetrain Speeds: 11, 12
- Chainring BCD: Direct Mount Bosch
- BB Included: No

$369.00
The e*thirteen e*spec Race Carbon Crank Arm Set is designed to work with Bosch Gen 4 eBike motors. These carbon crank arms offer a slim Q-factor and smaller overall profile, while keeping e*thirteen's proven crank technology at the forefront.
- An 8mm self extractor bolt is built into both arms for easy removal
- World-Cup DH-rated layup and construction
- Compacted carbon fiber with an additional 3k added to front and rear faces of crank for impact resistance
- Number of Chainrings: No Rings Included
- Chainline/Hub Compatibility: 141/148 Boost Hubs, 150/157 Hubs
- Crank Intended Use: Mountain
- Pedal Spindle: 9/16"
- Designed for ebike: Yes
- Drivetrain Speeds: 11, 12
- Chainring BCD: Direct Mount Bosch
- BB Included: No

$83.99
absoluteBLACK Oval Direct Mount 1x Chainrings for CINCH greatly improve traction and climbing abilities. They are designed for Race Face cranks that utilize the CINCH system. Direct mount chainrings provide significant weight savings over a standard spider and chainring combination. They are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. Ovality has been optimized for each chainring size, ranging from 10.2-14.4%, with timing of 110.5-116.3° after TDC (top dead center).
- Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding
- The unique, patent-pending narrow-wide tooth profile keeps the chain in place
- Teeth have been 3D-machined for ultimate mud shedding and quieter operation
- Provides excellent weight-to-strength ratio
- 6mm offset for standard 49mm chainline

$83.99 - $139.99
absoluteBLACK Oval Direct Mount 1x Chainrings for SRAM greatly improve traction and climbing abilities. They are designed for SRAM cranks that have a 3-bolt direct mount interface and removable spider. Direct mount chainrings provide significant weight savings over a standard spider and chainring combination. They are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. Ovality has been optimized for each chainring size, ranging from 10.2-14.4%, with timing of 110.5-116.3° after TDC (top dead center).
- Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding
- The unique, patent-pending narrow-wide tooth profile keeps the chain in place
- Teeth have been 3D-machined for ultimate mud shedding and quieter operation
- Provides excellent weight-to-strength ratio
- 3mm offset is designed for 141/148 Boost spacing on standard DUB/GXP/Long Spindle BB30, as well as 157 Super Boost spacing on dedicated Super Boost DUB cranks
- Designed for GXP, DUB, and long-spindle BB30 cranks

$60.00 - $65.99
On today's road bikes, silver stands out amid the sea of stealthy black color schemes. This time-honored color is available on the Zipp Service Course stem. Since the introduction of our line of Service Course and Service Course SL components, we've had amazing success with our pro-level athletes in all disciplines. While the successes have reinforced our design decisions, we have also drawn from their feedback. We not only learned how and why athletes make their equipment choices, but how our manufacturing methods and materials affect product performance. With new knowledge as well as new engineering methods, we are proud to introduce our completely redesigned line of Service Course and Service Course SL stems.
- Class-leading stiffness-to-weight ratio
- More options for a better fit
- New faceplate and geometry for greater stiffness and easier installation
- Distinctive silver finish

$104.95
The GeoShift Performance Angle Headset allows you to adjust the geometry of your bike by changing the head tube angle, available in 1 or 2 degree options. This unique design lets the bearings sit at an angle to align with the steerer tube, preventing creaking noises commonly found with angle headsets that feature a spherical design. Reduce the head tube angle to make for slacker geometry and added stability on fast descents, or increase the angle using the opposite orientation of the headset, to make for steeper geometry and quicker steering with maximum front wheel traction.
- Enduro black oxide coated chromium steel bearing included on both the upper and lower
- Upper headsets ship with a star nut which can only be used on forks with steel or aluminum steerer tubes. For forks with carbon steerer tubes you will need a compression plug (sold separately)
- Machined in the USA with lightweight, strong, durable aircraft-grade 6061 aluminum
- Includes: Upper and lower cups, bearings, crown race, star nut, shims, stem cap with 5mm integrated spacer and bolt
- 1 Degree Adjustment
- Long version is designed for headtube lengths between 115 - 140 mm

$76.95
Wolf Tooth's SDM chainrings replace your existing spider and chainring with one clean looking, light weight, and stiff piece of machined billet. These come in 3 different offsets: standard GXP, Boost and BB30.
Compatibility:
- These direct mount chainrings will replace your existing chainring and spider, which is attached via 3 bolts on the back side of the spider near the spindle. You will use these same 3 bolts to attach the Wolf Tooth SDM chainring.
There are 3 offsets: 0mm, 3mm, and 6mm
- 49mm chainline, 0mm offset for BB30 short-spindle cranks
- 52mm chainline, 3mm offset BB30
- 47mm chainline, 6mm offset for cyclocross and road cranks
- 49mm chainline, 6mm offset for GXP and long spindle BB30 Boost
Notes for use with Fat Bikes:
- If you are planning to use this on an X9 or XX1 fat bike crankset with a 190/197 rear hub spacing use the 0 offset ring.
- If your fat bike has a 170/177 rear hub spacing, use the Standard 6mm offset

$59.95 - $69.95
- Standard 4-bolt ring with Drop-Stop tooth design to prevent unwanted chain drop
- Recommended for use with 10 or 11sp chain (10sp chain works on 9sp drivetrain)
- Designed and manufactured in the USA from 7075-T6 aluminum alloy
- 36g (30t)

$64.95 - $79.95
Designed to fit any 96 Symmetric BCD Shimano Cranksets. These rings feature the patent pending Drop-Stop asymmetrical tooth design for the best in wear life, mud clearance, and chain retention.
- Features Wolf Tooth's Drop-Stop tooth design for maximum chain retention
- Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains
- Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains
- Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings
- If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention
- Made from 7075-T6 aluminum for long life
- Chainline is 49mm
- Chainrings are threaded for standard M8 chainring bolts for no-nut installation

$59.95
This chainring's tooth profile was developed specifically for Shimano's XTR, XT, and SLX 12-speed Hyperglide+ chain.
- Compatible only with Hyperglide+ 12-speed chain
- For use with Wolf Tooth CAMO spiders (not compatible with any other chainring mountings)
- Elliptical rings provide smoother, more efficient pedal rotation, which means better traction
- Maintains quiet and smooth performance of the Hyperglide+ drivetrain with exceptional chain retention
- Prevents premature ring and chain wear that can come from non-optimized profiles

$54.95
This chainring's tooth profile was developed specifically for Shimano's XTR, XT, and SLX 12-speed Hyperglide+ chain.
- Compatible only with Hyperglide+ 12-speed chain
- For use with Wolf Tooth CAMO spiders (not compatible with any other chainring mountings)
- Maintains quiet and smooth performance of the Hyperglide+ drivetrain with exceptional chain retention
- Prevents premature ring and chain wear that can come from non-optimized profiles

$79.95
Designed for Race Face CINCH cranks with removable spiders. Its proprietary design has an ovality of 10% and a timing of 112 degrees after top dead center which provide the beneifits of an oval ring such as greater rear wheel traction without the traditional downsides of oval rings. This chainring features the patent pending asymmetrical Drop-Stop tooth design for the best in wear life, mud clearance, and chain retention.
- Elliptical chainring shape provides better efficiency in the recovery zone, as well as increased traction thanks to consistent torque
- Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains
- Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains
- Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings
- If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention
- Made from 7075-T6 aluminum for long life
- Use of a clutch-style rear derailleur is recommended
- 52mm chainline / 3mm offset for boost spacing

$86.95
This chainring's tooth profile was developed specifically for Shimano's XTR 12-speed Hyperglide+ chain.
- Compatible only with Hyperglide+ 12-speed chains
- For use with Shimano XTR M9100 series cranksets
- Maintains quiet and smooth performance of the Hyperglide+ drivetrain with exceptional chain retention
- Prevents premature ring and chain wear that can come from non-optimized profiles

$22.95 - $27.99
Ergonomic silicone grips from Wolf Tooth.
- Multi-position ergonomic design
- Unique design increases grip and comfort while climbing

$19.95 - $23.99
Slightly thicker than the Razer Grips, slightly thinner than the Fat Paw Grips, these 6.5mm thick grips are great for longer rides, as they reduce hand fatigue and finger numbness.
- 100% proprietary dual-density silicone compound provides excellent vibration damping and conforms to your hand for improved comfort while maintaining durability
- Tacky texture provides excellent grip with or without gloves in all weather conditions
- 6.5mm thick

$76.95
Designed to fit SRAM cranksets with removable spiders. Its proprietary design has an ovality of 10% and a timing of 112 degrees after top dead center which provide the benefits of an oval ring such as greater rear wheel traction without the traditional downsides of oval rings.
- Elliptical rings provide smoother, more efficient pedal rotation, which means better traction
- Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains
- Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains
- Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings
- If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention
- Not compatible with the SRAM RED and Force AXS 8-bolt interface
- Made from 7075-T6 aluminum for long life
- Use of a clutch-style rear derailleur is recommended
- 3mm offset is designed for boost cranksets (52mm chainline)

$84.95
Direct mount rings designed for SRAM cranks with 8-bolt mounting. This chainring is equipped with the patent pending Drop-Stop asymmetrical tooth design for the best in wear life, mud clearance, and chain retention.
- Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains
- Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains
- Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings
- If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention
- Compatible with SRAM AXS cranksets and other cranks that use the 8-bolt mounting
- Made from 7075-T6 aluminum for long life
- 6mm offset
- 45mm chainline
- Use of a clutch-style rear derailleur is recommended
- Use the same 8 bolts that were on the crankset to attach the Wolf Tooth ring

$74.95
The ReMote BarCentric is a dropper lever option for bikes with front shifters, lockout levers, or e-bike controls. The slender design of the ReMote BarCentric allows it to easily fit between the left grip and levers with four potential lever positioning options to avoid any interference with existing levers. This dropper lever has a ring shape that encompasses the handlebar, while also serving as a pivot point to provide the rider with extra leverage, making it easier to press the lever.
- Compatible with left side controls including 2x shifters, suspension lockout levers, and under-bar e-bike controls
- Large, smooth, sealed Enduro ball bearing that encircles the handlebar
- Clean and efficient cable routing flows around disc brake levers
- Adjustable reach for ideal ergonomics and controls clearance
- Compatible with all cabled actuated dropper posts
- Works with dropper posts that have the barrel end of the cable at the remote and those that have the barrel end at the post
- Works with any mountain bike handlebar
- Can be rotated to your preferred position

$21.99
Roadlink Rear Derailleur Part
- The RoadLink is optimized for use with ten or eleven-speed 11-36t and 11-40t cassettes
- 11-42 or 10-42 setups are not supported
- Works with all 10-11 speed Shimano and SRAM Road Derailleurs
- Best used with Single or Double Setups - see manufacturer's site for more details

$24.95
Valais Dropper Post Seat Bag Adapter
- Allows the usage of seat packs on a dropper post
- Protects the dropper stanchion from wear and grit
- Can act as a travel limiter when full drop isn't needed

$158.00
Whisky's No.9 Riser Bar features a 25mm rise and a 5-degree upsweep to offer a slightly more upright riding position that increases control and comfort. It’s wide, sleek, and tested to the highest standards to deliver a ride you can trust mile after mile. Trimmable ends allow you to really dial in your fit to keep you comfortable every time your tires hit the dirt or snow.
$23.00
The Whisky compression plug for carbon forks is reliable and easy to use. The simple design offers excellent support and function, works great with Whisky carbon forks, and may fit other manufacturer's forks as well.

$55.17
Replacement Enduro 6806/29 ABEC-3 sealed bearings for Wheels Mfg DUB Compatible bottom brackets.
- Dimensions: OD: 42mm / ID: 29mm / Width: 7mm
- ABEC-3 - Grade 10, 5/32" chromium steel balls
- Kyodo Yushi SRL grease or equivalent
- Imported
- Sold as Bag of 2

$118.65
By popular demand, Wheels Mfg. added this PF30 Outboard Bearing BB for use with 30mm spindle cranksets when used in PF30 frames. The two machined aluminum cups thread together keeping the bottom bracket stable in the frame, increasing bearing life and simplifying maintenance. Enjoy smooth operation, fast bearing replacement, and no more creaking. Note: Spindle length must be 103mm or longer when used in a 68mm wide shell; 108mm or longer when used in a 73mm wide shell. - Bearings: ABEC-3 - Color: Black - Bottom Bracket/Frame Interface: PF30, Specialized Carbon OSBB - Bottom Bracket Shell Width: 61mm – 83mm (Specialized Carbon OSBB with 61mm shell width will need additional 3.5mm cup spacers, sold separately) - Bottom Bracket Shell I.D.: 46mm - Over Bearing Width: 89mm in 68mm wide shell (dimensions include supplied silicone dust shields) - Crank Spindle Diameter: 30mm - Tool Pattern: 48.5mm x 16 notch - Weight: 151g

$40.00
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance.
- OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application.
- These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399)
- CNC machined 6061 aluminum
- Made in the USA

$22.00
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance.
- OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application.
- These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399)
- CNC machined 6061 aluminum
- Made in the USA

$39.95
The Koda was refined through two years of feedback from female testers and has evolved into a saddle that even the boys at the office are fighting over. This saddle boasts all-day comfort and a shape that everyone can enjoy.
- All-day comfort with a generously open channel dividing supportive outer zones to alleviate pressure on your sensitive bits
- Short nose provides seamless on-off transitions while a slightly swooped shape provides an adequate tail to brace against
- Steel rails

$79.95
The Rocket is an incredibly versatile saddle. From a two minute hair-raising downhill to a 2700-mile individual time trial, this saddle is the top choice for those pushing the sport.
- Narrow nose and midsection means no chafing during long pedaling sessions
- Thick padding and a swooped tail allow riders to lock in their ideal position for power and comfort
- Cromoly rails

$39.95 - $44.99
The Rocket is an incredibly versatile saddle. From a two minute hair-raising downhill to a 2700-mile individual time trial, this saddle is the top choice for those pushing the sport.
- Narrow nose and midsection means no chafing during long pedaling sessions
- Thick padding and a swooped tail allow riders to lock in their ideal position for power and comfort
- Steel rails

$44.99
WTB's best-selling saddle utilizes our shock-absorbing, dual compound Soft-Shell base to provide unparalleled comfort at an excellent value. Supportive padding and mid dimensions make for a near fool-proof favorite at a don't-think-about-it-twice price.
- Steel rails

$39.95 - $47.95
The Volt is our most popular mountain saddle. Shaped for speed and comfort, time tested and proven, the Volt makes for an incredibly versatile saddle that has gained endless acclaim among riders.
- Medium padding thickness and subtle curves make the Volt our most popular mountain saddle
- An upward curved tail and gentle drop to the nose provide something to push against while pedaling
- Steel rails

$21.99
VP's Grind Pedals meet the needs of hard-core riders who want a slick and durable set of pedals, and they also work great for anyone who likes stable and comfortable platforms. The Grinds have versatile good looks and feature a thin profile, durable 1-piece nylon bodies with grip pins, boron-steel axles and oversize inboard bearings.
- 380 grams
- 9/16" axles

$194.00
On the big days, it's the small comforts that make the ride better, longer. That's why we re-engineered our carbon riser bars to improve feel, flex and rider positioning and reduce trail buzz. These bars are stiff, precise and forgiving. With a re-tuned carbon laminate, your shoulders, arms and hands keep fresh all day.
- Available in 760mm carbon with 20mm rise
- 35mm clamp
- Super-wide to start and trimmable by 40mm (20mm each side)
- Specialty tuned carbon laminate to absorb noise while maintaining stiffness
SPECIFICATIONS
- Type: Riser
- Clamp Diameter: 35.0mm
- Width: 760mm
- Rise: 20mm
- Backsweep (degrees): 7

$32.00 - $34.99
The Descendant grip is for the performance-driven hard charger who needs maximum grip and confidence in their cockpit. Featuring a full-width contact area that extends from the inner clamp right to the end of the bar. The ridged pattern allows for a soft-to-touch feel and makes for superior grip and control. Available in solid colors, marble and gum options, these grips give you the option to match grip performance with your personal style.
- Single-ring clamp for max width and comfort
- Available in Black, Gray, Gum Rubber, Red, Gray/Black Marble and Red/Black Marble
- Soft and durable ridged rubber grip pattern
- Length: 133mm
- Clamp: Single

$24.99
Get back on the trail with a quality replacement hanger.
- Attachment hardware is sold separately
- For use with 135x5mm hubs
Specifications:
- Size: Rear drive side, 135mm Q/R
- Mounting location: Rear drive side
- Attachment: Thru axle nut

$19.99
Get back on the trail with a quality replacement hanger.
- Trek/Fisher full suspension rocker pivot suspension hardware
- For specific compatibility concerns, please contact our Customer Service team
Specifications:
- Size: Rear drive side, 148x12mm Thru Axle
- Mounting location: Rear drive side
- Attachment: Thru axle nut

$24.99
Get back on the trail with a quality replacement hanger.
- Attachment hardware is sold separately
- For use with 142x12mm, 148x12mm, 157x12mm, and 197x12mm hubs
Specifications:
- Size: Rear drive side, Thru Axle
- Mounting location: Rear drive side
- Attachment: Thru axle nut

$24.99
Genuine replacement parts
Use a smaller battery in your 625Wh RIB battery slot.
Fill the gap between your 625Wh battery slot and your 500Wh battery.
- Not compatible with Bosch Smart System batteries
- Only for use in 625Wh slots with 500Wh batteries
- Hardware is included
- Refer to Service Manual for assembly instructions and service

$5.99
Genuine replacement parts
Genuine replacement parts
Original Equipment specifications.
Compatible with Bosch Powertube RIB batteries.
- Hardware should be ordered separately

$19.99
Get back on the trail with a quality replacement hanger.
- Attachment hardware is sold separately
- For specific compatibility concerns, please contact our Customer Service team
Specifications:
- Size: Rear drive side, 135mm Q/R
- Mounting location: Rear drive side
- Attachment: 1-bolt

$29.99
Genuine replacement parts
Get back on the trail with a quality replacement hanger.
Don't be left hanging.
- Attachment hardware is sold separately
- Compatible with Superfly SS 2015-2016 (142x12mm OLD)
- Compatible with Stache 29+ 2016-2022 (148x12mm OLD)
- Compatible with 1120 2018-2022 (148x12mm OLD)
- Compatible with Farley 2016-2022 (197x12mm OLD)

$20.99
Get back on the road with a quality replacement hanger.
- Attachment hardware is sold separately
- For specific compatibility concerns, please contact our Customer Service team
Specifications:
- Size: Rear drive side, 135mm Q/R
- Mounting location: Rear drive side
- Attachment: 2-bolt

$19.99
Get back on the trail with a quality replacement hanger.
- 30mm washer provides full coverage over ABP bearing seals
- Included attachment hardware is reverse threaded
- For specific compatibility concerns, please contact our Customer Service team
- Hanger can be used on standard SRAM UDH set ups with 25mm washer
Specifications:
- Size: Rear drive side, Thru Axle
- Mounting location: Rear drive side
- Attachment: Thru axle nut

$34.99
Precision CNC machined of light and durable 7000-series aluminum with a fine anodized finish, and 100% made in the USA, Thomson's Seatpost Collar is a beautiful upgrade for your bicycle. It features their bolt, washer and barrel nut combination that allows float on both sides of the collar slot for consistent clamping force. Plus the bolt-hole angle, the collar's 12.7mm inside height and the offset slot, ensure optimum seatpost clamping force at only 25 inch pounds of torque to protect your precious frame and seatpost.

$11.99 - $12.99
Adapters to convert your flat mount frame or fork to post mount.
- FF-1 front 140mm rotor
- FF-2 front 160mm rotor
- FR-1 rear 140mm rotor
- FR-2 rear 160mm rotor

$29.99
Full sintered metallic replacement pads for flat mount Hylex RS brakes.
- Full metallic compound for maximum performance and power
- Fits Hylex RS brakes
- Color: TRP Copper
- Sold per wheel

$14.99 - $15.99
Adapters to convert your rear flat mount frame to post mount caliper
- FR1-R140 = rear 140mm rotor
- FR2-R160 = rear 160mm rotor
- Each includes two 32mm bolts

$64.99
The Spyre is a mechanical disc brake that offers superior performance with incredibly easy setup. This is a dual-piston-actuated mechanical disc brake caliper that provides precise clamping force. This translates into even pad and rotor wear, because the rotor does not need to flex to one side during braking. We added a simple cable barrel adjuster to make fine-tuning easy. All of this in an incredibly thin 40mm, 146g package that works with any drop bar levers on the market. Rotors and adapters are sold separately.
For tandem bikes, we recommend the Spyre caliper paired with our 2.3mm thick rotors. This will give optimum stopping performance for you and your partner.
SPECIFICATIONS
- Weight: 154g per caliper
- Dual-sided actuation
- Works with ALL cable-actuated road levers. Compressionless (linear strand) housing is highly recommended
- Comes with TRP ultra-grippy semi-metallic pads
- Calipers are compatible with Shimano M525/M515 pads
- 160mm rotors recommended on front wheel
- Rotors, adapters, and flat mount mounting bolts sold separately
- All flat mount calipers being mounted to the fork require the FF-5 Front Flat Mount 140/160mm adapter
- Sold as a caliper only

$16.00
Surly Stainless Steel Track Lockring.
- Fits all but Campagnolo, Miche or Phil Wood
- 5mm thick with 0.65mm lip for maximum thread and lockring wrench contact

$129.00
- A super slim 12mm for maximized pedal clearance, weight optimized trail pedal at 360g per set.
- Forged alloy body is shot peened and anodized for increased durability
- Equipped with forged hollow taper chromoly steel axles for unmatched strength
- Sealed bearings, IGUS bushings
- 18 preassembled pins in virtual concavity for ultimate grip and stability on trails
- KEY TECHNOLOGIES: MGR, industrial grade axle assembly, chamfered leading edges
- MATERIAL: Forged MGR alloy body, CNC optimized
- PLATFORM SIZE (mm): 100 x 100
- PLATFORM PROFILE (mm): 12
- WEIGHT (g): ±360 / Set
- AXLE: Cold forged chromoly steel
- BEARING / BUSHING Full complement industrial sealed bearing, IGUS bushing
- PINS: 18 steel pins (per pedal) - virtual concavity configuration
- FINISH: Shot peen anodized, CNC logos

$87.99
Shimano's 105 10-Speed Cassette delivers excellent shifting and durability. The cogs are made of long-lasing, smooth-running steel. They have Shimano's engineered tooth shapes for precision shifting. And for lightness, the cassette has an aluminum carrier for the top cogs and nylon spacers.

$58.99
- Shimano 105 R7000 Series CS-HG700-11 cassette
- Average weight: 379g
- Combination: 11-13-15-17-19-21-23-25-27-30-34T

$49.99
Shimano's 105 Clamp-On Front Derailleur sports a cold forged-aluminum body with Shimano's extra wide-pivot design for lightning-quick and super-smooth shifts. The steel cage ensures excellent durability.

$50.99 - $74.99
- Shimano 105 R7000 Series CS-R7000 11-speed cassette
- Average weight: 284 g (11-28T), 304 g (11-30T), 320 g (11-32T), 269 g (12-25T)
Combinations:
- 11 – 28T: 11-12-13-14-15-17-19-21-23-25-28T
- 11 – 30T: 11-12-13-14-15-17-19-21-24-27-30T
- 11 – 32T: 11-12-13-14-16-18-20-22-25-28-32T
- 12 – 25T: 12-13-14-15-16-17-18-19-21-23-25T
Page 1 of 6
Next page